欧美激情操逼,操中国熟女,《被迫献身的人妇》电影 ,爱爱日韩,成人超碰在线,麻豆av在线免费观看,曰逼视频,国产无遮挡又黄又爽又色

Axial推出全新 SCX24 2019 Jeep Wrangler JLU CRC 4WD小型RTR攀爬遙控車。比例1/24，能夠在室內和戶外行走，無論是辦公室桌面還是家庭都是理想的賽道，而防水的電子設備又能輕松應付戶外各種地形。全時四驅，鋼制梯形車架，前三連桿和后四連桿懸掛，提升通過性；車橋使用蝸齒，增加離地間距。擁有快速拆裝的電池設計，供選擇的兩款顏色Jeep? Wrangler仿真的車殼搭配KMC Machete授權輪圈和Nitto Trail Grappler輪胎，兩顆前置LED，即使在夜間也能照亮前路。RTR產品，配備AX-4 2.4GHz遙控器、AE-6電子變速器，AS-1舵機，180馬達(88T)，Dynamite? 7.4v 350mAh 2S LiPo鋰電(USB充電器)。參數：離地27mm、高度106.5mm、長度199.5mm、軸距132.5mm、寬度99.5mm。產品編號AXI00002

No matter where you are, the 1/24 scale Axial? SCX24? Jeep? Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial? SCX24? Jeep? Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24? Jeep? Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.

長：199.5mm

寬：99.5mm

高：106.5mm

軸距：132.5mm

重量：0.22kg

You expect solid performance from Axial? and the SCX24? 2019 Jeep? Wrangler delivers, with engineering and equipment that pulls the greatest potential from its compact size. The included Dynamite? 88T brushed electric motor supplies the torque you need to get up and over most obstacles. And despite the dimensions, it’s a pretty capable rock crawler, too! We've also included extra suspension links for adjusting your wheelbase length.

EVERYTHING IS INCLUDED! The SCX24? includes everything you need to get going. The product is fully assembled, and we've included batteries for the transmitter, and a LiPo battery pack and USB charger.

INCLUDED:

? Axial AX-4 2.4GHz, 3 Channel Radio System

? Axial AS-1 Servo ? Axial AE-6 ESC/Receiver Combo

? USB Charger (DYNC1062)

? Dynamite 88T 030 Brushed Electric Motor

? Dynamite 350mAh 2S LiPo 7.4V Battery Pack (DYNB0012)

? 4AA Batteries for the Transmitter

The AX-4 transmitter features a throttle trim knob for low, medium, and high speed setting, a switch for steering servo reversing, steering dual rate, a switch for third channel applications (aux port on the ESC/Receiver), steering trim, battery level indicator, a bind button, and on/off switch.

The AE-6 ESC/Receiver features a jumper for setting one of two brake options (brakes, or instant reverse), two LED light ports, an auxiliary port (channel 3), a channel 2 port, and a steering servo port.

FEATURESFRONT AND REAR SOLID AXLES The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24? suspension features a three-link front and four-link rear setup.

STEEL C-CHANNEL CHASSIS FRAME RAILS

Just like the 1/10th scale SCX10? platform, the SCX24? chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.

DYNAMITE 88T BRUSHED MOTOR

The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It’s mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.

WORM GEARS The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.

DURABLE STEEL AXLES

Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.

SPLINED DRIVE SHAFTS

The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.

COILOVER SHOCK ABSORBERS

Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you’ve known and expect from Axial. #AXIALPERFORMANCE

LED LIGHTS INCLUDED

Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.

4-LINK REAR SUSPENSION

The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.

KMC XD229 MACHETE CRAWL WHEELS

Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.

HINGED BODY SYSTEM

The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just a single body clip and swinging the body up.

NITTO TRAIL GRAPPLER M/T TIRES

The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.

AXIAL AS-1 SERVO

Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.