1. <strong id="7actg"></strong>
    2. <table id="7actg"></table>

    3. <address id="7actg"></address>
      <address id="7actg"></address>
      1. <object id="7actg"><tt id="7actg"></tt></object>

        Go官方庫源碼分析:time/rate

        共 1226字,需瀏覽 3分鐘

         ·

        2021-10-08 21:24

        這是golang 源碼中實現的限流器,是基于令牌桶算法的:

        官方地址: golang.org/x/time/rate


        github地址:github.com/golang/time/rate

        ???r?:=?rate.Every(100?*?time.Millisecond)???limit?:=?rate.NewLimiter(r,?20)   for {       if limit.AllowN(time.Now(), 8) {           log.Info("log:event happen")       } else {           log.Info("log:event not allow")       }
        }

        一秒內產生10 個令牌,桶的容量是20,當前時刻取8個token

        源碼很簡單只有兩個文件:

        rate.gorate_test.go

        1,NewLimiter

        // NewLimiter returns a new Limiter that allows events up to rate r and permits// bursts of at most b tokens.func NewLimiter(r Limit, b int) *Limiter {  return &Limiter{    limit: r,    burst: b,  }}

        簡單構造了一個limiter對象

        type Limiter struct {  mu     sync.Mutex  limit  Limit  burst  int  tokens float64  // last is the last time the limiter's tokens field was updated  last time.Time  // lastEvent is the latest time of a rate-limited event (past or future)  lastEvent time.Time}

        記錄了上一次分發token的時間,和上一次請求token的時間

        func Every(interval time.Duration) Limit {  if interval <= 0 {    return Inf  }  return 1 / Limit(interval.Seconds())}

        僅僅做了從時間間隔向頻率的轉換。


        2,AllowN/Allow

        // Allow is shorthand for AllowN(time.Now(), 1).func (lim *Limiter) Allow() bool {  return lim.AllowN(time.Now(), 1)}
        // AllowN reports whether n events may happen at time now.// Use this method if you intend to drop / skip events that exceed the rate limit.// Otherwise use Reserve or Wait.func (lim *Limiter) AllowN(now time.Time, n int) bool { return lim.reserveN(now, n, 0).ok}

        底層都是調用了reserveN函數,maxFutureReserve參數傳的是0

        // reserveN is a helper method for AllowN, ReserveN, and WaitN.// maxFutureReserve specifies the maximum reservation wait duration allowed.// reserveN returns Reservation, not *Reservation, to avoid allocation in AllowN and WaitN.func (lim *Limiter) reserveN(now time.Time, n int, maxFutureReserve time.Duration) Reservation {  lim.mu.Lock()
        if lim.limit == Inf { lim.mu.Unlock() return Reservation{ ok: true, lim: lim, tokens: n, timeToAct: now, } }
        now, last, tokens := lim.advance(now)
        // Calculate the remaining number of tokens resulting from the request. tokens -= float64(n)
        // Calculate the wait duration var waitDuration time.Duration if tokens < 0 { waitDuration = lim.limit.durationFromTokens(-tokens) }
        // Decide result ok := n <= lim.burst && waitDuration <= maxFutureReserve
        // Prepare reservation r := Reservation{ ok: ok, lim: lim, limit: lim.limit, } if ok { r.tokens = n r.timeToAct = now.Add(waitDuration) }
        // Update state if ok { lim.last = now lim.tokens = tokens lim.lastEvent = r.timeToAct } else { lim.last = last }
        lim.mu.Unlock() return r}

        1,如果lim.limit == Inf,返回Reservation對象

        // A Reservation holds information about events that are permitted by a Limiter to happen after a delay.// A Reservation may be canceled, which may enable the Limiter to permit additional events.type Reservation struct {  ok        bool  lim       *Limiter  tokens    int  timeToAct time.Time  // This is the Limit at reservation time, it can change later.  limit Limit}

        2,獲取當前時間,上一次產生token的時間和,產生的token

        // advance calculates and returns an updated state for lim resulting from the passage of time.// lim is not changed.// advance requires that lim.mu is held.func (lim *Limiter) advance(now time.Time) (newNow time.Time, newLast time.Time, newTokens float64) {  last := lim.last  if now.Before(last) {    last = now  }
        // Calculate the new number of tokens, due to time that passed. elapsed := now.Sub(last) delta := lim.limit.tokensFromDuration(elapsed) tokens := lim.tokens + delta if burst := float64(lim.burst); tokens > burst { tokens = burst } return now, last, tokens}

        A,如果當前時間比上一次獲取token時間早(說明有請求在等待獲取token),那么更新當前時間為上一次獲取token時間(和上一個請求一起等

        B,計算從上一次獲取token到現在的時間間隔
        C,計算產生的token增量

         delta := lim.limit.tokensFromDuration(elapsed)
        type Limit float64// tokensFromDuration is a unit conversion function from a time duration to the number of tokens// which could be accumulated during that duration at a rate of limit tokens per second.func (limit Limit) tokensFromDuration(d time.Duration) float64 {  return d.Seconds() * float64(limit)}

        也就是時間間隔的秒數乘以每秒產生的token數量。

        D,計算總的token數量

        E,如果桶已經滿了,丟棄多余的token

        3,扣減本次請求需要的token

        4,如果token數不夠,計算需要等待的時間間隔

        5,如果請求的token數量比桶的容量小,并且可以等待的時間大于需要等待的時間說明這個請求是合法的。

        ok?:=?n?<=?lim.burst?&&?waitDuration?<=?maxFutureReserve

        6,構造Reservation對象,存儲當前l(fā)imiter對象到lim

        7,如果請求合法,存儲當前請求需要的token數量和需要等待的時間(當前時間+等待時間間隔)

        8,如果合法,更新當前l(fā)imiter的上一次獲取token時間為當前時間,獲取的token數量為扣減后剩余的token數量,獲取token時間為將來能夠真正獲取token的時間點。

        9,否則更新limiter的上一次獲取token時間為本次計算的上一次獲取token時間。

        上面就是獲取token的所有代碼實現。


        Limiter提供了三類方法供用戶消費Token,用戶可以每次消費一個Token,也可以一次性消費多個Token。

        1,AllowN 方法表示,截止到某一時刻,目前桶中數目是否至少為 n 個,滿足則返回 true,同時從桶中消費 n 個 token。反之返回不消費 token,false。也就是前面介紹的方法。

        func (lim *Limiter) Allow() boolfunc (lim *Limiter) AllowN(now time.Time, n int) bool


        2,當使用 Wait 方法消費 token 時,如果此時桶內 token 數組不足 (小于 N),那么 Wait 方法將會阻塞一段時間,直至 token 滿足條件。如果充足則直接返回。

        func (lim *Limiter) Wait(ctx context.Context) (err error)func (lim *Limiter) WaitN(ctx context.Context, n int) (err error)
        // WaitN blocks until lim permits n events to happen.// It returns an error if n exceeds the Limiter's burst size, the Context is// canceled, or the expected wait time exceeds the Context's Deadline.// The burst limit is ignored if the rate limit is Inf.func (lim *Limiter) WaitN(ctx context.Context, n int) (err error) {  lim.mu.Lock()  burst := lim.burst  limit := lim.limit  lim.mu.Unlock()
        if n > burst && limit != Inf { return fmt.Errorf("rate: Wait(n=%d) exceeds limiter's burst %d", n, burst) } // Check if ctx is already cancelled select { case <-ctx.Done(): return ctx.Err() default: } // Determine wait limit now := time.Now() waitLimit := InfDuration if deadline, ok := ctx.Deadline(); ok { waitLimit = deadline.Sub(now) } // Reserve r := lim.reserveN(now, n, waitLimit) if !r.ok { return fmt.Errorf("rate: Wait(n=%d) would exceed context deadline", n) } // Wait if necessary delay := r.DelayFrom(now) if delay == 0 { return nil } t := time.NewTimer(delay) defer t.Stop() select { case <-t.C: // We can proceed. return nil case <-ctx.Done(): // Context was canceled before we could proceed. Cancel the // reservation, which may permit other events to proceed sooner. r.Cancel() return ctx.Err() }}

        A,如果請求數量超出了桶的容量,直接報錯

        B,通過ctx.Deadline()計算允許等待的時間間隔

        C,調用r := lim.reserveN(now, n, waitLimit)?獲取Reserve對象

        D,如果reserve對象表示不能成功(超出桶的容量,超出時間限制),返回錯誤

        E,計算需要等待的時間,timeToAct表示能夠獲取token的時間。

        // DelayFrom returns the duration for which the reservation holder must wait// before taking the reserved action.  Zero duration means act immediately.// InfDuration means the limiter cannot grant the tokens requested in this// Reservation within the maximum wait time.func (r *Reservation) DelayFrom(now time.Time) time.Duration {  if !r.ok {    return InfDuration  }  delay := r.timeToAct.Sub(now)  if delay < 0 {    return 0  }  return delay}

        F,啟動定時器等待。

        3,ReserveN 的用法就相對來說復雜一些,當調用完成后,無論 token 是否充足,都會返回一個 Reservation * 對象。

        你可以調用該對象的 Delay() 方法,該方法返回了需要等待的時間。如果等待時間為 0,則說明不用等待。

        必須等到等待時間之后,才能進行接下來的工作。

        或者,如果不想等待,可以調用 Cancel() 方法,該方法會將 token 歸還。

        func (lim *Limiter) Reserve() *Reservationfunc (lim *Limiter) ReserveN(now time.Time, n int) *Reservation

        這個方法比較原始直接返回Reserve對象,交給用戶處理

        func (lim *Limiter) ReserveN(now time.Time, n int) *Reservation {  r := lim.reserveN(now, n, InfDuration)  return &r}


        推薦閱讀


        福利

        我為大家整理了一份從入門到進階的Go學習資料禮包,包含學習建議:入門看什么,進階看什么。關注公眾號 「polarisxu」,回復?ebook?獲??;還可以回復「進群」,和數萬 Gopher 交流學習。

        瀏覽 38
        點贊
        評論
        收藏
        分享

        手機掃一掃分享

        分享
        舉報
        評論
        圖片
        表情
        推薦
        點贊
        評論
        收藏
        分享

        手機掃一掃分享

        分享
        舉報
        1. <strong id="7actg"></strong>
        2. <table id="7actg"></table>

        3. <address id="7actg"></address>
          <address id="7actg"></address>
          1. <object id="7actg"><tt id="7actg"></tt></object>
            男人的天堂最新资源 | 91女人18毛片水多的意思 | 大鸡巴操小骚逼 | 二区中文字幕 | ThePorn人妻白浆 | 公交车艳遇辣文h婷 | 亚洲午夜无码久久 | 欧美福利二区 | 国产小黄片 | 免费人成视频在线观看视频 |