一. 為什么是k8s v1.16.0？

最新版的v1.16.2試過了，一直無法安裝完成，安裝到kubeadm init那一步執行后，報了很多錯，如：node xxx not found等。centos7都重裝了幾次，還是無法解決。用了一天都沒安裝完，差點放棄。

后來在網上搜到的安裝教程基本都是v1.16.0的，我不太相信是v1.16.2的坑所以先前沒打算降級到v1.16.0。沒辦法了就試著安裝v1.16.0版本，竟然成功了。記錄在此，避免后來者踩坑。

本篇文章，安裝大步驟如下：

• 安裝docker-ce 18.09.9（所有機器）
• 設置k8s環境前置條件（所有機器）
• 安裝k8s v1.16.0 master管理節點
• 安裝k8s v1.16.0 node工作節點
• 安裝flannel（master）

這里有重要的一步，請記住自己master和node之間通信的ip，如我的master的ip為192.168.99.104，node的ip為：192.168.99.105. 請確保使用這兩個ip在master和node上能互相ping通，這個master的ip 192.168.99.104接下來配置k8s的時候需要用到。

我的環境：

• 操作系統：win10
• 虛擬機：virtual box
• linux發行版：CentOS7
• linux內核(使用uname -r查看)：3.10.0-957.el7.x86_64
• master和node節點通信的ip(master)：192.168.99.104

二. 安裝docker-ce 18.09.9（所有機器）

所有安裝k8s的機器都需要安裝docker，命令如下：

#?安裝docker所需的工具
yum?install?-y?yum-utils?device-mapper-persistent-data?lvm2
#?配置阿里云的docker源
yum-config-manager?--add-repo?http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
#?指定安裝這個版本的docker-ce
yum?install?-y?docker-ce-18.09.9-3.el7
#?啟動docker
systemctl?enable?docker?&&?systemctl?start?docker

三. 設置k8s環境準備條件（所有機器）

安裝k8s的機器需要2個CPU和2g內存以上，這個簡單，在虛擬機里面配置一下就可以了。然后執行以下腳本做一些準備操作。所有安裝k8s的機器都需要這一步操作。

#?關閉防火墻
systemctl?disable?firewalld
systemctl?stop?firewalld

#?關閉selinux
#?臨時禁用selinux
setenforce?0
#?永久關閉?修改/etc/sysconfig/selinux文件設置
sed?-i?'s/SELINUX=permissive/SELINUX=disabled/'?/etc/sysconfig/selinux
sed?-i?"s/SELINUX=enforcing/SELINUX=disabled/g"?/etc/selinux/config

#?禁用交換分區
swapoff?-a
#?永久禁用，打開/etc/fstab注釋掉swap那一行。
sed?-i?'s/.*swap.*/#&/'?/etc/fstab

#?修改內核參數
cat?<??/etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables?=?1
net.bridge.bridge-nf-call-iptables?=?1
EOF
sysctl?--system

四. 安裝k8s v1.16.0 master管理節點

如果還沒安裝docker，請參照本文步驟二安裝docker-ce 18.09.9（所有機器）安裝。

如果沒設置k8s環境準備條件，請參照本文步驟三設置k8s環境準備條件（所有機器）執行。

以上兩個步驟檢查完畢之后，繼續以下步驟。

1. 安裝kubeadm、kubelet、kubectl

由于官方k8s源在google，國內無法訪問，這里使用阿里云yum源

#?執行配置k8s阿里云源
cat?<?/etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg?https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

#?安裝kubeadm、kubectl、kubelet
yum?install?-y?kubectl-1.16.0-0?kubeadm-1.16.0-0?kubelet-1.16.0-0

#?啟動kubelet服務
systemctl?enable?kubelet?&&?systemctl?start?kubelet

2. 初始化k8s

以下這個命令開始安裝k8s需要用到的docker鏡像，因為無法訪問到國外網站，所以這條命令使用的是國內的阿里云的源(registry.aliyuncs.com/google_containers)。

另一個非常重要的是：這里的--apiserver-advertise-address使用的是master和node間能互相ping通的ip，我這里是192.168.99.104，剛開始在這里被坑了一個晚上，你請自己修改下ip執行。

這條命令執行時會卡在[preflight] You can also perform this action in beforehand using ''kubeadm config images pull，大概需要2分鐘，請耐心等待。

#?下載管理節點中用到的6個docker鏡像，你可以使用docker?images查看到
#?這里需要大概兩分鐘等待，會卡在[preflight]?You?can?also?perform?this?action?in?beforehand?using?''kubeadm?config?images?pull
kubeadm?init?--image-repository?registry.aliyuncs.com/google_containers?--kubernetes-version?v1.16.0?--apiserver-advertise-address?192.168.99.104?--pod-network-cidr=10.244.0.0/16?--token-ttl?0

上面安裝完后，會提示你輸入如下命令，復制粘貼過來，執行即可。

#?上面安裝完成后，k8s會提示你輸入如下命令，執行
mkdir?-p?$HOME/.kube
sudo?cp?-i?/etc/kubernetes/admin.conf?$HOME/.kube/config
sudo?chown?$(id?-u):$(id?-g)?$HOME/.kube/config

3. 記住node加入集群的命令

上面kubeadm init執行成功后會返回給你node節點加入集群的命令，等會要在node節點上執行，需要保存下來，如果忘記了，可以使用如下命令獲取。

kubeadm?token?create?--print-join-command?

以上，安裝master節點完畢。可以使用kubectl get nodes查看一下，此時master處于NotReady狀態，暫時不用管。

五. 安裝k8s v1.16.0 node工作節點

如果還沒安裝docker，請參照本文步驟二安裝docker-ce 18.09.9（所有機器）安裝。

如果沒設置k8s環境準備條件，請參照本文步驟三設置k8s環境準備條件（所有機器）執行。

以上兩個步驟檢查完畢之后，繼續以下步驟。

1. 安裝kubeadm、kubelet

#?執行配置k8s阿里云源
cat?<?/etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg?https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

#?安裝kubeadm、kubectl、kubelet
yum?install?-y??kubeadm-1.16.0-0?kubelet-1.16.0-0

#?啟動kubelet服務
systemctl?enable?kubelet?&&?systemctl?start?kubelet

2. 加入集群

這里加入集群的命令每個人都不一樣，可以登錄master節點，使用kubeadm token create --print-join-command 來獲取。獲取后執行如下。

#?加入集群，如果這里不知道加入集群的命令，可以登錄master節點，使用kubeadm?token?create?--print-join-command?來獲取?
kubeadm?join?192.168.99.104:6443?--token?ncfrid.7ap0xiseuf97gikl?\
????--discovery-token-ca-cert-hash?sha256:47783e9851a1a517647f1986225f104e81dbfd8fb256ae55ef6d68ce9334c6a2

加入成功后，可以在master節點上使用kubectl get nodes命令查看到加入的節點。

六. 安裝flannel（master機器）

以上步驟安裝完后，機器搭建起來了，但狀態還是NotReady狀態，如下圖，master機器需要安裝flanneld。

1. 下載官方fannel配置文件

使用wget命令，地址為：(https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml)，這個地址國內訪問不了，所以我把內容復制下來，為了避免前面文章過長，我把它粘貼到文章末尾第八個步驟附錄了。

這個yml配置文件中配置了一個國內無法訪問的地址(quay.io)，我已經將其改為國內可以訪問的地址(quay-mirror.qiniu.com)。我們新建一個kube-flannel.yml文件，復制粘貼該內容即可。

搜索Java知音公眾號，回復“后端面試”，送你一份Java面試題寶典.pdf

2. 安裝fannel

kubectl?apply?-f?kube-flannel.yml

七. 大功告成

至此，k8s集群搭建完成，如下圖節點已為Ready狀態，大功告成，完結撒花。

八. 附錄

這是kube-flannel.yml文件的內容，已經將無法訪問的地址(quay.io)全部改為國內可以訪問的地址(quay-mirror.qiniu.com)。我們新建一個kube-flannel.yml文件，復制粘貼該內容即可。

---
apiVersion:?policy/v1beta1
kind:?PodSecurityPolicy
metadata:
??name:?psp.flannel.unprivileged
??annotations:
????seccomp.security.alpha.kubernetes.io/allowedProfileNames:?docker/default
????seccomp.security.alpha.kubernetes.io/defaultProfileName:?docker/default
????apparmor.security.beta.kubernetes.io/allowedProfileNames:?runtime/default
????apparmor.security.beta.kubernetes.io/defaultProfileName:?runtime/default
spec:
??privileged:?false
??volumes:
????-?configMap
????-?secret
????-?emptyDir
????-?hostPath
??allowedHostPaths:
????-?pathPrefix:?"/etc/cni/net.d"
????-?pathPrefix:?"/etc/kube-flannel"
????-?pathPrefix:?"/run/flannel"
??readOnlyRootFilesystem:?false
??#?Users?and?groups
??runAsUser:
????rule:?RunAsAny
??supplementalGroups:
????rule:?RunAsAny
??fsGroup:
????rule:?RunAsAny
??#?Privilege?Escalation
??allowPrivilegeEscalation:?false
??defaultAllowPrivilegeEscalation:?false
??#?Capabilities
??allowedCapabilities:?['NET_ADMIN']
??defaultAddCapabilities:?[]
??requiredDropCapabilities:?[]
??#?Host?namespaces
??hostPID:?false
??hostIPC:?false
??hostNetwork:?true
??hostPorts:
??-?min:?0
????max:?65535
??#?SELinux
??seLinux:
????#?SELinux?is?unused?in?CaaSP
????rule:?'RunAsAny'
---
kind:?ClusterRole
apiVersion:?rbac.authorization.k8s.io/v1beta1
metadata:
??name:?flannel
rules:
??-?apiGroups:?['extensions']
????resources:?['podsecuritypolicies']
????verbs:?['use']
????resourceNames:?['psp.flannel.unprivileged']
??-?apiGroups:
??????-?""
????resources:
??????-?pods
????verbs:
??????-?get
??-?apiGroups:
??????-?""
????resources:
??????-?nodes
????verbs:
??????-?list
??????-?watch
??-?apiGroups:
??????-?""
????resources:
??????-?nodes/status
????verbs:
??????-?patch
---
kind:?ClusterRoleBinding
apiVersion:?rbac.authorization.k8s.io/v1beta1
metadata:
??name:?flannel
roleRef:
??apiGroup:?rbac.authorization.k8s.io
??kind:?ClusterRole
??name:?flannel
subjects:
-?kind:?ServiceAccount
??name:?flannel
??namespace:?kube-system
---
apiVersion:?v1
kind:?ServiceAccount
metadata:
??name:?flannel
??namespace:?kube-system
---
kind:?ConfigMap
apiVersion:?v1
metadata:
??name:?kube-flannel-cfg
??namespace:?kube-system
??labels:
????tier:?node
????app:?flannel
data:
??cni-conf.json:?|
????{
??????"name":?"cbr0",
??????"cniVersion":?"0.3.1",
??????"plugins":?[
????????{
??????????"type":?"flannel",
??????????"delegate":?{
????????????"hairpinMode":?true,
????????????"isDefaultGateway":?true
??????????}
????????},
????????{
??????????"type":?"portmap",
??????????"capabilities":?{
????????????"portMappings":?true
??????????}
????????}
??????]
????}
??net-conf.json:?|
????{
??????"Network":?"10.244.0.0/16",
??????"Backend":?{
????????"Type":?"vxlan"
??????}
????}
---
apiVersion:?apps/v1
kind:?DaemonSet
metadata:
??name:?kube-flannel-ds-amd64
??namespace:?kube-system
??labels:
????tier:?node
????app:?flannel
spec:
??selector:
????matchLabels:
??????app:?flannel
??template:
????metadata:
??????labels:
????????tier:?node
????????app:?flannel
????spec:
??????affinity:
????????nodeAffinity:
??????????requiredDuringSchedulingIgnoredDuringExecution:
????????????nodeSelectorTerms:
??????????????-?matchExpressions:
??????????????????-?key:?beta.kubernetes.io/os
????????????????????operator:?In
????????????????????values:
??????????????????????-?linux
??????????????????-?key:?beta.kubernetes.io/arch
????????????????????operator:?In
????????????????????values:
??????????????????????-?amd64
??????hostNetwork:?true
??????tolerations:
??????-?operator:?Exists
????????effect:?NoSchedule
??????serviceAccountName:?flannel
??????initContainers:
??????-?name:?install-cni
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-amd64
????????command:
????????-?cp
????????args:
????????-?-f
????????-?/etc/kube-flannel/cni-conf.json
????????-?/etc/cni/net.d/10-flannel.conflist
????????volumeMounts:
????????-?name:?cni
??????????mountPath:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????containers:
??????-?name:?kube-flannel
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-amd64
????????command:
????????-?/opt/bin/flanneld
????????args:
????????-?--ip-masq
????????-?--kube-subnet-mgr
????????resources:
??????????requests:
????????????cpu:?"100m"
????????????memory:?"50Mi"
??????????limits:
????????????cpu:?"100m"
????????????memory:?"50Mi"
????????securityContext:
??????????privileged:?false
??????????capabilities:
????????????add:?["NET_ADMIN"]
????????env:
????????-?name:?POD_NAME
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.name
????????-?name:?POD_NAMESPACE
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.namespace
????????volumeMounts:
????????-?name:?run
??????????mountPath:?/run/flannel
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????volumes:
????????-?name:?run
??????????hostPath:
????????????path:?/run/flannel
????????-?name:?cni
??????????hostPath:
????????????path:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????configMap:
????????????name:?kube-flannel-cfg
---
apiVersion:?apps/v1
kind:?DaemonSet
metadata:
??name:?kube-flannel-ds-arm64
??namespace:?kube-system
??labels:
????tier:?node
????app:?flannel
spec:
??selector:
????matchLabels:
??????app:?flannel
??template:
????metadata:
??????labels:
????????tier:?node
????????app:?flannel
????spec:
??????affinity:
????????nodeAffinity:
??????????requiredDuringSchedulingIgnoredDuringExecution:
????????????nodeSelectorTerms:
??????????????-?matchExpressions:
??????????????????-?key:?beta.kubernetes.io/os
????????????????????operator:?In
????????????????????values:
??????????????????????-?linux
??????????????????-?key:?beta.kubernetes.io/arch
????????????????????operator:?In
????????????????????values:
??????????????????????-?arm64
??????hostNetwork:?true
??????tolerations:
??????-?operator:?Exists
????????effect:?NoSchedule
??????serviceAccountName:?flannel
??????initContainers:
??????-?name:?install-cni
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-arm64
????????command:
????????-?cp
????????args:
????????-?-f
????????-?/etc/kube-flannel/cni-conf.json
????????-?/etc/cni/net.d/10-flannel.conflist
????????volumeMounts:
????????-?name:?cni
??????????mountPath:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????containers:
??????-?name:?kube-flannel
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-arm64
????????command:
????????-?/opt/bin/flanneld
????????args:
????????-?--ip-masq
????????-?--kube-subnet-mgr
????????resources:
??????????requests:
????????????cpu:?"100m"
????????????memory:?"50Mi"
??????????limits:
????????????cpu:?"100m"
????????????memory:?"50Mi"
????????securityContext:
??????????privileged:?false
??????????capabilities:
?????????????add:?["NET_ADMIN"]
????????env:
????????-?name:?POD_NAME
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.name
????????-?name:?POD_NAMESPACE
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.namespace
????????volumeMounts:
????????-?name:?run
??????????mountPath:?/run/flannel
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????volumes:
????????-?name:?run
??????????hostPath:
????????????path:?/run/flannel
????????-?name:?cni
??????????hostPath:
????????????path:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????configMap:
????????????name:?kube-flannel-cfg
---
apiVersion:?apps/v1
kind:?DaemonSet
metadata:
??name:?kube-flannel-ds-arm
??namespace:?kube-system
??labels:
????tier:?node
????app:?flannel
spec:
??selector:
????matchLabels:
??????app:?flannel
??template:
????metadata:
??????labels:
????????tier:?node
????????app:?flannel
????spec:
??????affinity:
????????nodeAffinity:
??????????requiredDuringSchedulingIgnoredDuringExecution:
????????????nodeSelectorTerms:
??????????????-?matchExpressions:
??????????????????-?key:?beta.kubernetes.io/os
????????????????????operator:?In
????????????????????values:
??????????????????????-?linux
??????????????????-?key:?beta.kubernetes.io/arch
????????????????????operator:?In
????????????????????values:
??????????????????????-?arm
??????hostNetwork:?true
??????tolerations:
??????-?operator:?Exists
????????effect:?NoSchedule
??????serviceAccountName:?flannel
??????initContainers:
??????-?name:?install-cni
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-arm
????????command:
????????-?cp
????????args:
????????-?-f
????????-?/etc/kube-flannel/cni-conf.json
????????-?/etc/cni/net.d/10-flannel.conflist
????????volumeMounts:
????????-?name:?cni
??????????mountPath:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????containers:
??????-?name:?kube-flannel
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-arm
????????command:
????????-?/opt/bin/flanneld
????????args:
????????-?--ip-masq
????????-?--kube-subnet-mgr
????????resources:
??????????requests:
????????????cpu:?"100m"
????????????memory:?"50Mi"
??????????limits:
????????????cpu:?"100m"
????????????memory:?"50Mi"
????????securityContext:
??????????privileged:?false
??????????capabilities:
?????????????add:?["NET_ADMIN"]
????????env:
????????-?name:?POD_NAME
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.name
????????-?name:?POD_NAMESPACE
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.namespace
????????volumeMounts:
????????-?name:?run
??????????mountPath:?/run/flannel
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????volumes:
????????-?name:?run
??????????hostPath:
????????????path:?/run/flannel
????????-?name:?cni
??????????hostPath:
????????????path:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????configMap:
????????????name:?kube-flannel-cfg
---
apiVersion:?apps/v1
kind:?DaemonSet
metadata:
??name:?kube-flannel-ds-ppc64le
??namespace:?kube-system
??labels:
????tier:?node
????app:?flannel
spec:
??selector:
????matchLabels:
??????app:?flannel
??template:
????metadata:
??????labels:
????????tier:?node
????????app:?flannel
????spec:
??????affinity:
????????nodeAffinity:
??????????requiredDuringSchedulingIgnoredDuringExecution:
????????????nodeSelectorTerms:
??????????????-?matchExpressions:
??????????????????-?key:?beta.kubernetes.io/os
????????????????????operator:?In
????????????????????values:
??????????????????????-?linux
??????????????????-?key:?beta.kubernetes.io/arch
????????????????????operator:?In
????????????????????values:
??????????????????????-?ppc64le
??????hostNetwork:?true
??????tolerations:
??????-?operator:?Exists
????????effect:?NoSchedule
??????serviceAccountName:?flannel
??????initContainers:
??????-?name:?install-cni
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-ppc64le
????????command:
????????-?cp
????????args:
????????-?-f
????????-?/etc/kube-flannel/cni-conf.json
????????-?/etc/cni/net.d/10-flannel.conflist
????????volumeMounts:
????????-?name:?cni
??????????mountPath:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????containers:
??????-?name:?kube-flannel
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-ppc64le
????????command:
????????-?/opt/bin/flanneld
????????args:
????????-?--ip-masq
????????-?--kube-subnet-mgr
????????resources:
??????????requests:
????????????cpu:?"100m"
????????????memory:?"50Mi"
??????????limits:
????????????cpu:?"100m"
????????????memory:?"50Mi"
????????securityContext:
??????????privileged:?false
??????????capabilities:
?????????????add:?["NET_ADMIN"]
????????env:
????????-?name:?POD_NAME
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.name
????????-?name:?POD_NAMESPACE
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.namespace
????????volumeMounts:
????????-?name:?run
??????????mountPath:?/run/flannel
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????volumes:
????????-?name:?run
??????????hostPath:
????????????path:?/run/flannel
????????-?name:?cni
??????????hostPath:
????????????path:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????configMap:
????????????name:?kube-flannel-cfg
---
apiVersion:?apps/v1
kind:?DaemonSet
metadata:
??name:?kube-flannel-ds-s390x
??namespace:?kube-system
??labels:
????tier:?node
????app:?flannel
spec:
??selector:
????matchLabels:
??????app:?flannel
??template:
????metadata:
??????labels:
????????tier:?node
????????app:?flannel
????spec:
??????affinity:
????????nodeAffinity:
??????????requiredDuringSchedulingIgnoredDuringExecution:
????????????nodeSelectorTerms:
??????????????-?matchExpressions:
??????????????????-?key:?beta.kubernetes.io/os
????????????????????operator:?In
????????????????????values:
??????????????????????-?linux
??????????????????-?key:?beta.kubernetes.io/arch
????????????????????operator:?In
????????????????????values:
??????????????????????-?s390x
??????hostNetwork:?true
??????tolerations:
??????-?operator:?Exists
????????effect:?NoSchedule
??????serviceAccountName:?flannel
??????initContainers:
??????-?name:?install-cni
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-s390x
????????command:
????????-?cp
????????args:
????????-?-f
????????-?/etc/kube-flannel/cni-conf.json
????????-?/etc/cni/net.d/10-flannel.conflist
????????volumeMounts:
????????-?name:?cni
??????????mountPath:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????containers:
??????-?name:?kube-flannel
????????image:?quay-mirror.qiniu.com/coreos/flannel:v0.11.0-s390x
????????command:
????????-?/opt/bin/flanneld
????????args:
????????-?--ip-masq
????????-?--kube-subnet-mgr
????????resources:
??????????requests:
????????????cpu:?"100m"
????????????memory:?"50Mi"
??????????limits:
????????????cpu:?"100m"
????????????memory:?"50Mi"
????????securityContext:
??????????privileged:?false
??????????capabilities:
?????????????add:?["NET_ADMIN"]
????????env:
????????-?name:?POD_NAME
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.name
????????-?name:?POD_NAMESPACE
??????????valueFrom:
????????????fieldRef:
??????????????fieldPath:?metadata.namespace
????????volumeMounts:
????????-?name:?run
??????????mountPath:?/run/flannel
????????-?name:?flannel-cfg
??????????mountPath:?/etc/kube-flannel/
??????volumes:
????????-?name:?run
??????????hostPath:
????????????path:?/run/flannel
????????-?name:?cni
??????????hostPath:
????????????path:?/etc/cni/net.d
????????-?name:?flannel-cfg
??????????configMap:
????????????name:?kube-flannel-cfg