1. <strong id="7actg"></strong>
    2. <table id="7actg"></table>

    3. <address id="7actg"></address>
      <address id="7actg"></address>
      1. <object id="7actg"><tt id="7actg"></tt></object>

        為什么不建議用try catch處理異常?

        共 42754字,需瀏覽 86分鐘

         ·

        2022-03-07 14:02

        ????關注后回復 “進群” ,拉你進程序員交流群????
           
             
        文章來源丨h(huán)ttp://u6.gg/kpz4f

        軟件開發過程中,不可避免的是需要處理各種異常,就我自己來說,至少有一半以上的時間都是在處理各種異常情況,所以代碼中就會出現大量的 try {...} catch {...} finally {...} 代碼塊,不僅有大量的冗余代碼,而且還影響代碼的可讀性。

        比較下面兩張圖,看看您現在編寫的代碼屬于哪一種風格?然后哪種編碼風格您更喜歡?

        丑陋的 try catch 代碼塊:
        優雅的 Controller:
        上面的示例,還只是在 Controller 層,如果是在 Service 層,可能會有更多的 try catch 代碼塊。這將會嚴重影響代碼的可讀性、“美觀性”。

        所以如果是我的話,我肯定偏向于第二種,我可以把更多的精力放在業務代碼的開發,同時代碼也會變得更加簡潔。

        既然業務代碼不顯式地對異常進行捕獲、處理,而異??隙ㄟ€是處理的,不然系統豈不是動不動就崩潰了,所以必須得有其他地方捕獲并處理這些異常。

        那么問題來了,如何優雅的處理各種異常?

        什么是統一異常處理


        Spring 在 3.2 版本增加了一個注解 @ControllerAdvice,可以與 @ExceptionHandler、@InitBinder、@ModelAttribute 等注解注解配套使用。

        對于這幾個注解的作用,這里不做過多贅述,若有不了解的,可以參考 Spring 3.2 新注解 @ControllerAdvice,先大概有個了解。

        不過跟異常處理相關的只有注解 @ExceptionHandler,從字面上看,就是異常處理器的意思。

        其實際作用也是:若在某個 Controller 類定義一個異常處理方法,并在方法上添加該注解,那么當出現指定的異常時,會執行該處理異常的方法。

        其可以使用 SpringMVC 提供的數據綁定,比如注入 HttpServletRequest 等,還可以接受一個當前拋出的 Throwable 對象。

        但是,這樣一來,就必須在每一個 Controller 類都定義一套這樣的異常處理方法,因為異常可以是各種各樣。這樣一來,就會造成大量的冗余代碼,而且若需要新增一種異常的處理邏輯,就必須修改所有 Controller 類了,很不優雅。

        當然你可能會說,那就定義個類似 BaseController 的基類,這樣總行了吧。

        這種做法雖然沒錯,但仍不盡善盡美,因為這樣的代碼有一定的侵入性和耦合性。簡簡單單的 Controller,我為啥非得繼承這樣一個類呢,萬一已經繼承其他基類了呢。大家都知道 Java 只能繼承一個類。

        那有沒有一種方案,既不需要跟 Controller 耦合,也可以將定義的異常處理器應用到所有控制器呢?

        所以注解 @ControllerAdvice 出現了,簡單的說,該注解可以把異常處理器應用到所有控制器,而不是單個控制器。

        借助該注解,我們可以實現:在獨立的某個地方,比如單獨一個類,定義一套對各種異常的處理機制,然后在類的簽名加上注解 @ControllerAdvice,統一對不同階段的、不同異常進行處理。這就是統一異常處理的原理。

        注意到上面對異常按階段進行分類,大體可以分成:進入 Controller 前的異常和 Service 層異常。

        具體可以參考下圖:
        不同階段的異常

        目標


        消滅 95% 以上的 try catch 代碼塊,以優雅的 Assert(斷言)方式來校驗業務的異常情況,只關注業務邏輯,而不用花費大量精力寫冗余的 try catch 代碼塊。

        統一異常處理實戰


        在定義統一異常處理類之前,先來介紹一下如何優雅的判定異常情況并拋異常。

        | 用 Assert(斷言)替換 throw exception

        想必 Assert(斷言)大家都很熟悉,比如 Spring 家族的 org.springframework.util.Assert,在我們寫測試用例的時候經常會用到。

        使用斷言能讓我們編碼的時候有一種非一般絲滑的感覺,比如:
            
        @Test
            public void test1() {
                ...
                User user = userDao.selectById(userId);
                Assert.notNull(user, "用戶不存在.");
                ...
            }

            @Test
            public void test2() {
                // 另一種寫法
                User user = userDao.selectById(userId);
                if (user == null) {
                    throw new IllegalArgumentException("用戶不存在.");
                }
            }

        有沒有感覺第一種判定非空的寫法很優雅,第二種寫法則是相對丑陋的 if {...} 代碼塊。那么神奇的 Assert.notNull() 背后到底做了什么呢?

        下面是 Assert 的部分源碼:
            
        public abstract class Assert {
            public Assert() {
            }

            public static void notNull(@Nullable Object object, String message{
                if (object == null) {
                    throw new IllegalArgumentException(message);
                }
            }
        }

        可以看到,Assert 其實就是幫我們把 if {...} 封裝了一下,是不是很神奇?雖然很簡單,但不可否認的是編碼體驗至少提升了一個檔次。

        那么我們能不能模仿 org.springframework.util.Assert,也寫一個斷言類,不過斷言失敗后拋出的異常不是 IllegalArgumentException 這些內置異常,而是我們自己定義的異常。

        下面讓我們來嘗試一下:
            
        Assert
        public interface Assert {
            /**
             * 創建異常
             * @param args
             * @return
             */

            BaseException newException(Object... args);

            /**
             * 創建異常
             * @param t
             * @param args
             * @return
             */

            BaseException newException(Throwable t, Object... args);

            /**
             * <p>斷言對象<code>obj</code>非空。如果對象<code>obj</code>為空,則拋出異常
             *
             * @param obj 待判斷對象
             */

            default void assertNotNull(Object obj) {
                if (obj == null) {
                    throw newException(obj);
                }
            }

            /**
             * <p>斷言對象<code>obj</code>非空。如果對象<code>obj</code>為空,則拋出異常
             * <p>異常信息<code>message</code>支持傳遞參數方式,避免在判斷之前進行字符串拼接操作
             *
             * @param obj 待判斷對象
             * @param args message占位符對應的參數列表
             */

            default void assertNotNull(Object obj, Object... args) {
                if (obj == null) {
                    throw newException(args);
                }
            }
        }

        
          
        上面的 Assert 斷言方法是使用接口的默認方法定義的,然后有沒有發現當斷言失敗后,拋出的異常不是具體的某個異常,而是交由 2 個 newException 接口方法提供。

        因為業務邏輯中出現的異?;径际菍?yīng)特定的場景,比如根據用戶 id 獲取用戶信息,查詢結果為 null,此時拋出的異??赡転?UserNotFoundException,并且有特定的異常碼(比如 7001)和異常信息“用戶不存在”。

        所以具體拋出什么異常,由 Assert 的實現類決定。

        看到這里,您可能會有這樣的疑問,按照上面的說法,那豈不是有多少異常情況,就得有定義等量的斷言類和異常類,這顯然是反人類的,這也沒想象中高明嘛。別急,且聽我細細道來。

        | 善解人意的 Enum

        自定義異常 BaseException 有 2 個屬性,即 code、message,這樣一對屬性,有沒有想到什么類一般也會定義這 2 個屬性?

        沒錯,就是枚舉類。且看我如何將 Enum 和 Assert 結合起來,相信我一定會讓你眼前一亮。

        如下:
            
        public interface IResponseEnum {
            int getCode();
            String getMessage();
        }
        /**
         * <p>業務異常</p>
         * <p>業務處理時,出現異常,可以拋出該異常</p>
         */

        public class BusinessException extends  BaseException {

            private static final long serialVersionUID = 1L;

            public BusinessException(IResponseEnum responseEnum, Object[] args, String message) {
                super(responseEnum, args, message);
            }

            public BusinessException(IResponseEnum responseEnum, Object[] args, String message, Throwable cause) {
                super(responseEnum, args, message, cause);
            }
        }
        public interface BusinessExceptionAssert extends IResponseEnumAssert {

            @Override
            default BaseException newException(Object... args) {
                String msg = MessageFormat.format(this.getMessage(), args);

                return new BusinessException(this, args, msg);
            }

            @Override
            default BaseException newException(Throwable t, Object... args) {
                String msg = MessageFormat.format(this.getMessage(), args);

                return new BusinessException(this, args, msg, t);
            }

        }
        @Getter
        @AllArgsConstructor
        public enum ResponseEnum implements BusinessExceptionAssert {

            /**
             * Bad licence type
             */

            BAD_LICENCE_TYPE(7001"Bad licence type."),
            /**
             * Licence not found
             */

            LICENCE_NOT_FOUND(7002"Licence not found.")
            ;

            /**
             * 返回碼
             */

            private int code;
            /**
             * 返回消息
             */

            private String message;
        }

        看到這里,有沒有眼前一亮的感覺,代碼示例中定義了兩個枚舉實例:
        • BAD_LICENCE_TYPE

        • LICENCE_NOT_FOUND




        他們分別對應了 BadLicenceTypeException、LicenceNotFoundException 兩種異常。

        以后每增加一種異常情況,只需增加一個枚舉實例即可,再也不用每一種異常都定義一個異常類了。然后再來看下如何使用,假設 LicenceService 有校驗 Licence 是否存在的方法,如下:
            
        /**
             * 校驗{@link Licence}存在
             * @param licence
             */

            private void checkNotNull(Licence licence) {
                ResponseEnum.LICENCE_NOT_FOUND.assertNotNull(licence);
            }

        若不使用斷言,代碼可能如下:
            
        private void checkNotNull(Licence licence{
                if (licence == null) {
                    throw new LicenceNotFoundException();
                    // 或者這樣
                    throw new BusinessException(7001"Bad licence type.");
                }
            }

        使用枚舉類結合(繼承)Assert,只需根據特定的異常情況定義不同的枚舉實例,如上面的 BAD_LICENCE_TYPE、LICENCE_NOT_FOUND,就能夠針對不同情況拋出特定的異常(這里指攜帶特定的異常碼和異常消息)。

        這樣既不用定義大量的異常類,同時還具備了斷言的良好可讀性,當然這種方案的好處遠不止這些,請繼續閱讀后文,慢慢體會。

        注:上面舉的例子是針對特定的業務,而有部分異常情況是通用的,比如:服務器繁忙、網絡異常、服務器異常、參數校驗異常、404 等,所以有CommonResponseEnum、ArgumentResponseEnum、ServletResponseEnum,其中 ServletResponseEnum 會在后文詳細說明。

        | 定義統一異常處理器類

            
        @Slf4j
        @Component
        @ControllerAdvice
        @ConditionalOnWebApplication
        @ConditionalOnMissingBean(UnifiedExceptionHandler.class)
        public class UnifiedExceptionHandler {
            /**
             * 生產環境
             */

            private final static String ENV_PROD = "prod";

            @Autowired
            private UnifiedMessageSource unifiedMessageSource;

            /**
             * 當前環境
             */

            @Value("${spring.profiles.active}")
            private String profile;

            /**
             * 獲取國際化消息
             *
             * @param e 異常
             * @return
             */

            public String getMessage(BaseException e) {
                String code = "response." + e.getResponseEnum().toString();
                String message = unifiedMessageSource.getMessage(code, e.getArgs());

                if (message == null || message.isEmpty()) {
                    return e.getMessage();
                }

                return message;
            }

            /**
             * 業務異常
             *
             * @param e 異常
             * @return 異常結果
             */

            @ExceptionHandler(value = BusinessException.class)
            @ResponseBody
            public ErrorResponse handleBusinessException(BaseException e) {
                log.error(e.getMessage(), e);

                return new ErrorResponse(e.getResponseEnum().getCode(), getMessage(e));
            }

            /**
             * 自定義異常
             *
             * @param e 異常
             * @return 異常結果
             */

            @ExceptionHandler(value = BaseException.class)
            @ResponseBody
            public ErrorResponse handleBaseException(BaseException e) {
                log.error(e.getMessage(), e);

                return new ErrorResponse(e.getResponseEnum().getCode(), getMessage(e));
            }

            /**
             * Controller上一層相關異常
             *
             * @param e 異常
             * @return 異常結果
             */

            @ExceptionHandler({
                    NoHandlerFoundException.class,
                    HttpRequestMethodNotSupportedException.class,
                    HttpMediaTypeNotSupportedException.class,
                    MissingPathVariableException.class,
                    MissingServletRequestParameterException.class,
                    TypeMismatchException.class,
                    HttpMessageNotReadableException.class,
                    HttpMessageNotWritableException.class,
                    // BindException.class,
                    // MethodArgumentNotValidException.class
                    HttpMediaTypeNotAcceptableException.class,
                    ServletRequestBindingException.class,
                    ConversionNotSupportedException.class,
                    MissingServletRequestPartException.class,
                    AsyncRequestTimeoutException.class
            })
            @ResponseBody
            public ErrorResponse handleServletException(Exception e) {
                log.error(e.getMessage(), e);
                int code = CommonResponseEnum.SERVER_ERROR.getCode();
                try {
                    ServletResponseEnum servletExceptionEnum = ServletResponseEnum.valueOf(e.getClass().getSimpleName());
                    code = servletExceptionEnum.getCode();
                } catch (IllegalArgumentException e1) {
                    log.error("class [{}] not defined in enum {}", e.getClass().getName(), ServletResponseEnum.class.getName());
                }

                if (ENV_PROD.equals(profile)) {
                    // 當為生產環境, 不適合把具體的異常信息展示給用戶, 比如404.
                    code = CommonResponseEnum.SERVER_ERROR.getCode();
                    BaseException baseException = new BaseException(CommonResponseEnum.SERVER_ERROR);
                    String message = getMessage(baseException);
                    return new ErrorResponse(code, message);
                }

                return new ErrorResponse(code, e.getMessage());
            }


            /**
             * 參數綁定異常
             *
             * @param e 異常
             * @return 異常結果
             */

            @ExceptionHandler(value = BindException.class)
            @ResponseBody
            public ErrorResponse handleBindException(BindException e) {
                log.error("參數綁定校驗異常", e);

                return wrapperBindingResult(e.getBindingResult());
            }

            /**
             * 參數校驗異常,將校驗失敗的所有異常組合成一條錯誤信息
             *
             * @param e 異常
             * @return 異常結果
             */

            @ExceptionHandler(value = MethodArgumentNotValidException.class)
            @ResponseBody
            public ErrorResponse handleValidException(MethodArgumentNotValidException e) {
                log.error("參數綁定校驗異常", e);

                return wrapperBindingResult(e.getBindingResult());
            }

            /**
             * 包裝綁定異常結果
             *
             * @param bindingResult 綁定結果
             * @return 異常結果
             */

            private ErrorResponse wrapperBindingResult(BindingResult bindingResult) {
                StringBuilder msg = new StringBuilder();

                for (ObjectError error : bindingResult.getAllErrors()) {
                    msg.append(", ");
                    if (error instanceof FieldError) {
                        msg.append(((FieldError) error).getField()).append(": ");
                    }
                    msg.append(error.getDefaultMessage() == null ? "" : error.getDefaultMessage());

                }

                return new ErrorResponse(ArgumentResponseEnum.VALID_ERROR.getCode(), msg.substring(2));
            }

            /**
             * 未定義異常
             *
             * @param e 異常
             * @return 異常結果
             */

            @ExceptionHandler(value = Exception.class)
            @ResponseBody
            public ErrorResponse handleException(Exception e) {
                log.error(e.getMessage(), e);

                if (ENV_PROD.equals(profile)) {
                    // 當為生產環境, 不適合把具體的異常信息展示給用戶, 比如數據庫異常信息.
                    int code = CommonResponseEnum.SERVER_ERROR.getCode();
                    BaseException baseException = new BaseException(CommonResponseEnum.SERVER_ERROR);
                    String message = getMessage(baseException);
                    return new ErrorResponse(code, message);
                }

                return new ErrorResponse(CommonResponseEnum.SERVER_ERROR.getCode(), e.getMessage());
            }

        }

        可以看到,上面將異常分成幾類,實際上只有兩大類,一類是 ServletException、ServiceException。

        還記得上文提到的按階段分類嗎,即對應進入 Controller 前的異常 和 Service 層異常;然后 ServiceException 再分成自定義異常、未知異常。

        對應關系如下:
        • 進入 Controller 前的異常:handleServletException、handleBindException、handleValidException

        • 自定義異常:handleBusinessException、handleBaseException

        • 未知異常:handleException


        接下來分別對這幾種異常處理器做詳細說明。

        異常處理器說明


        | handleServletException

        一個 http 請求,在到達 Controller 前,會對該請求的請求信息與目標控制器信息做一系列校驗。

        這里簡單說一下:

        NoHandlerFoundException:首先根據請求 Url 查找有沒有對應的控制器,若沒有則會拋該異常,也就是大家非常熟悉的 404 異常。

        HttpRequestMethodNotSupportedException:若匹配到了(匹配結果是一個列表,不同的是 http 方法不同,如:Get、Post 等),則嘗試將請求的 http 方法與列表的控制器做匹配,若沒有對應 http 方法的控制器,則拋該異常。

        HttpMediaTypeNotSupportedException:然后再對請求頭與控制器支持的做比較。

        比如 content-type 請求頭,若控制器的參數簽名包含注解 @RequestBody,但是請求的 content-type 請求頭的值沒有包含 application/json,那么會拋該異常(當然,不止這種情況會拋這個異常)。

        MissingPathVariableException:未檢測到路徑參數。比如 url 為:/licence/{licenceId},參數簽名包含 @PathVariable("licenceId")。

        當請求的 url 為 /licence,在沒有明確定義 url 為 /licence 的情況下,會被判定為:缺少路徑參數。

        MissingServletRequestParameterException:缺少請求參數。比如定義了參數 @RequestParam("licenceId") String licenceId,但發起請求時,未攜帶該參數,則會拋該異常。

        TypeMismatchException:參數類型匹配失敗。比如:接收參數為 Long 型,但傳入的值確是一個字符串,那么將會出現類型轉換失敗的情況,這時會拋該異常。

        HttpMessageNotReadableException:與上面的 HttpMediaTypeNotSupportedException 舉的例子完全相反。

        即請求頭攜帶了"content-type: application/json;charset=UTF-8",但接收參數卻沒有添加注解 @RequestBody,或者請求體攜帶的 json 串反序列化成 pojo 的過程中失敗了,也會拋該異常。

        HttpMessageNotWritableException:返回的 pojo 在序列化成 json 過程失敗了,那么拋該異常。

        | handleBindException

        參數校驗異常,后文詳細說明。

        | handleValidException

        參數校驗異常,后文詳細說明。

        | handleBusinessException、handleBaseException

        處理自定義的業務異常,只是 handleBaseException 處理的是除了 BusinessException 意外的所有業務異常。就目前來看,這 2 個是可以合并成一個的。

        | handleException

        處理所有未知的異常,比如操作數據庫失敗的異常。

        注:上面的 handleServletException、handleException 這兩個處理器,返回的異常信息,不同環境返回的可能不一樣,以為這些異常信息都是框架自帶的異常信息,一般都是英文的,不太好直接展示給用戶看,所以統一返回 SERVER_ERROR 代表的異常信息。

        異于常人的404


        上文提到,當請求沒有匹配到控制器的情況下,會拋出 NoHandlerFoundException 異常,但其實默認情況下不是這樣,默認情況下會出現類似如下頁面:
        Whitelabel Error Page

        這個頁面是如何出現的呢?實際上,當出現 404 的時候,默認是不拋異常的,而是 forward 跳轉到 /error 控制器。

        Spring 也提供了默認的 error 控制器,如下:
        那么,如何讓 404 也拋出異常呢,只需在 properties 文件中加入如下配置即可:
            
        spring.mvc.throw-exception-if-no-handler-found=true
        spring.resources.add-mappings=false

        如此,就可以異常處理器中捕獲它了,然后前端只要捕獲到特定的狀態碼,立即跳轉到 404 頁面即可。

        捕獲404對應的異常


        | 統一返回結果

        在驗證統一異常處理器之前,順便說一下統一返回結果。說白了,其實是統一一下返回結果的數據結構。

        code、message 是所有返回結果中必有的字段,而當需要返回數據時,則需要另一個字段 data 來表示。

        所以首先定義一個 BaseResponse 來作為所有返回結果的基類;然后定義一個通用返回結果類 CommonResponse,繼承 BaseResponse,而且多了字段 data。

        為了區分成功和失敗返回結果,于是再定義一個 ErrorResponse。

        最后還有一種常見的返回結果,即返回的數據帶有分頁信息,因為這種接口比較常見,所以有必要單獨定義一個返回結果類 QueryDataResponse。

        該類繼承自 CommonResponse,只是把 data 字段的類型限制為 QueryDdata,QueryDdata中定義了分頁信息相應的字段,即 totalCount、pageNo、 pageSize、records。

        其中比較常用的只有 CommonResponse 和 QueryDataResponse,但是名字又賊鬼死長,何不定義 2 個名字超簡單的類來替代呢?

        于是 R 和 QR 誕生了,以后返回結果的時候只需這樣寫:new R<>(data)、new QR<>(queryData)。

        所有的返回結果類的定義這里就不貼出來了。

        | 驗證統一異常處理

        因為這一套統一異常處理可以說是通用的,所有可以設計成一個 common包,以后每一個新項目/模塊只需引入該包即可。所以為了驗證,需要新建一個項目,并引入該 common 包。

        下面是用于驗證的主要源碼:
            
        @Service
        public class LicenceService extends ServiceImpl<LicenceMapperLicence{

            @Autowired
            private OrganizationClient organizationClient;

            /**
             * 查詢{@link Licence} 詳情
             * @param licenceId
             * @return
             */

            public LicenceDTO queryDetail(Long licenceId) {
                Licence licence = this.getById(licenceId);
                checkNotNull(licence);

                OrganizationDTO org = ClientUtil.execute(() -> organizationClient.getOrganization(licence.getOrganizationId()));
                return toLicenceDTO(licence, org);
            }

            /**
             * 分頁獲取
             * @param licenceParam 分頁查詢參數
             * @return
             */

            public QueryData<SimpleLicenceDTO> getLicences(LicenceParam licenceParam) {
                String licenceType = licenceParam.getLicenceType();
                LicenceTypeEnum licenceTypeEnum = LicenceTypeEnum.parseOfNullable(licenceType);
                // 斷言, 非空
                ResponseEnum.BAD_LICENCE_TYPE.assertNotNull(licenceTypeEnum);

                LambdaQueryWrapper<Licence> wrapper = new LambdaQueryWrapper<>();
                wrapper.eq(Licence::getLicenceType, licenceType);
                IPage<Licence> page = this.page(new QueryPage<>(licenceParam), wrapper);
                return new QueryData<>(page, this::toSimpleLicenceDTO);
            }

            /**
             * 新增{@link Licence}
             * @param request 請求體
             * @return
             */

            @Transactional(rollbackFor = Throwable.class)
            public LicenceAddRespData addLicence(LicenceAddRequest request) {
                Licence licence = new Licence();
                licence.setOrganizationId(request.getOrganizationId());
                licence.setLicenceType(request.getLicenceType());
                licence.setProductName(request.getProductName());
                licence.setLicenceMax(request.getLicenceMax());
                licence.setLicenceAllocated(request.getLicenceAllocated());
                licence.setComment(request.getComment());
                this.save(licence);

                return new LicenceAddRespData(licence.getLicenceId());
            }

            /**
             * entity -> simple dto
             * @param licence {@link Licence} entity
             * @return {@link SimpleLicenceDTO}
             */

            private SimpleLicenceDTO toSimpleLicenceDTO(Licence licence) {
                // 省略
            }

            /**
             * entity -> dto
             * @param licence {@link Licence} entity
             * @param org {@link OrganizationDTO}
             * @return {@link LicenceDTO}
             */

            private LicenceDTO toLicenceDTO(Licence licence, OrganizationDTO org) {
                // 省略
            }

            /**
             * 校驗{@link Licence}存在
             * @param licence
             */

            private void checkNotNull(Licence licence) {
                ResponseEnum.LICENCE_NOT_FOUND.assertNotNull(licence);
            }

        }

        PS:這里使用的 DAO 框架是 mybatis-plus。

        啟動時,自動插入的數據為:
            
        -- licence
        INSERT INTO licence (licence_id, organization_id, licence_type, product_name, licence_max, licence_allocated)
        VALUES (11'user','CustomerPro'100,5);
        INSERT INTO licence (licence_id, organization_id, licence_type, product_name, licence_max, licence_allocated)
        VALUES (21'user','suitability-plus'200,189);
        INSERT INTO licence (licence_id, organization_id, licence_type, product_name, licence_max, licence_allocated)
        VALUES (32'user','HR-PowerSuite'100,4);
        INSERT INTO licence (licence_id, organization_id, licence_type, product_name, licence_max, licence_allocated)
        VALUES (42'core-prod','WildCat Application Gateway'16,16);

        -- organizations
        INSERT INTO organization (idname, contact_name, contact_email, contact_phone)
        VALUES (1'customer-crm-co''Mark Balster''[email protected]''823-555-1212');
        INSERT INTO organization (idname, contact_name, contact_email, contact_phone)
        VALUES (2'HR-PowerSuite''Doug Drewry','[email protected]''920-555-1212');

        開始驗證


        | 捕獲自定義異常

        獲取不存在的 licence 詳情:http://localhost:10000/licence/5

        成功響應的請求:
            
        licenceId=1

        檢驗非空:
        捕獲 Licence not found 異常:
        Licence not found:
        根據不存在的 licence type 獲取 licence 列表:http://localhost:10000/licence/list?licenceType=ddd??蛇x的 licence type 為:user、core-prod 。

        校驗非空:
        捕獲 Bad licence type 異常:
        Bad licence type:

        | 捕獲進入 Controller 前的異常

        訪問不存在的接口:http://localhost:10000/licence/list/ddd

        捕獲 404 異常:
        http 方法不支持:http://localhost:10000/licence

        PostMapping:
        捕獲 Request method not supported 異常:
        Request method not supported:
        校驗異常 1:http://localhost:10000/licence/list?licenceType=

        getLicences:
        LicenceParam:
        捕獲參數綁定校驗異常:
        licence type cannot be empty:
        校驗異常 2:post 請求,這里使用 postman 模擬

        addLicence:
        LicenceAddRequest:
        請求 url 即結果:
        捕獲參數綁定校驗異常:
        注:因為參數綁定校驗異常的異常信息的獲取方式與其它異常不一樣,所以才把這 2 種情況的異常從進入 Controller 前的異常單獨拆出來,下面是異常信息的收集邏輯。

        異常信息的收集:

        | 捕獲未知異常

        假設我們現在隨便對 Licence 新增一個字段 test,但不修改數據庫表結構,然后訪問:http://localhost:10000/licence/1。

        增加 test 字段:
        捕獲數據庫異常:
        Error querying database:

        小結


        可以看到,測試的異常都能夠被捕獲,然后以 code、message 的形式返回。

        每一個項目/模塊,在定義業務異常的時候,只需定義一個枚舉類,然后實現接口 BusinessExceptionAssert,最后為每一種業務異常定義對應的枚舉實例即可,而不用定義許多異常類。使用的時候也很方便,用法類似斷言。

        擴展


        在生產環境,若捕獲到未知異?;蛘?ServletException,因為都是一長串的異常信息,若直接展示給用戶看,顯得不夠?qū)I(yè),于是,我們可以這樣做:當檢測到當前環境是生產環境,那么直接返回 "網絡異常"。

        生產環境返回“網絡異?!保?/span>
        可以通過以下方式修改當前環境:

        總結


        使用斷言和枚舉類相結合的方式,再配合統一異常處理,基本大部分的異常都能夠被捕獲。

        為什么說大部分異常,因為當引入 spring cloud security 后,還會有認證/授權異常,網關的服務降級異常、跨模塊調用異常、遠程調用第三方服務異常等,這些異常的捕獲方式與本文介紹的不太一樣,不過限于篇幅,這里不做詳細說明,以后會有單獨的文章介紹。

        另外,當需要考慮國際化的時候,捕獲異常后的異常信息一般不能直接返回,需要轉換成對應的語言,不過本文已考慮到了這個,獲取消息的時候已經做了國際化映射,邏輯如下:
        獲取國際化消息

        最后總結,全局異常屬于老生長談的話題,希望這次通過手機的項目對大家有點指導性的學習,大家根據實際情況自行修改。

        也可以采用以下的 jsonResult 對象的方式進行處理,也貼出來代碼:
            
        @Slf4j
        @RestControllerAdvice
        public class GlobalExceptionHandler {

            /**
             * 沒有登錄
             * @param request
             * @param response
             * @param e
             * @return
             */

            @ExceptionHandler(NoLoginException.class)
            public Object noLoginExceptionHandler(HttpServletRequest request,HttpServletResponse response,Exception e)
            
        {
                log.error("[GlobalExceptionHandler][noLoginExceptionHandler] exception",e);
                JsonResult jsonResult = new JsonResult();
                jsonResult.setCode(JsonResultCode.NO_LOGIN);
                jsonResult.setMessage("用戶登錄失效或者登錄超時,請先登錄");
                return jsonResult;
            }

            /**
             * 業務異常
             * @param request
             * @param response
             * @param e
             * @return
             */

            @ExceptionHandler(ServiceException.class)
            public Object businessExceptionHandler(HttpServletRequest request,HttpServletResponse response,Exception e)
            
        {
                log.error("[GlobalExceptionHandler][businessExceptionHandler] exception",e);
                JsonResult jsonResult = new JsonResult();
                jsonResult.setCode(JsonResultCode.FAILURE);
                jsonResult.setMessage("業務異常,請聯系管理員");
                return jsonResult;
            }

            /**
             * 全局異常處理
             * @param request
             * @param response
             * @param e
             * @return
             */

            @ExceptionHandler(Exception.class)
            public Object exceptionHandler(HttpServletRequest request,HttpServletResponse response,Exception e)
            
        {
                log.error("[GlobalExceptionHandler][exceptionHandler] exception",e);
                JsonResult jsonResult = new JsonResult();
                jsonResult.setCode(JsonResultCode.FAILURE);
                jsonResult.setMessage("系統錯誤,請聯系管理員");
                return jsonResult;
            }
        }

        -End-

        最近有一些小伙伴,讓我?guī)兔φ乙恍?nbsp;面試題 資料,于是我翻遍了收藏的 5T 資料后,匯總整理出來,可以說是程序員面試必備!所有資料都整理到網盤了,歡迎下載!

        點擊??卡片,關注后回復【面試題】即可獲取

        在看點這里好文分享給更多人↓↓

        瀏覽 56
        點贊
        評論
        收藏
        分享

        手機掃一掃分享

        分享
        舉報
        評論
        圖片
        表情
        推薦
        點贊
        評論
        收藏
        分享

        手機掃一掃分享

        分享
        舉報
        1. <strong id="7actg"></strong>
        2. <table id="7actg"></table>

        3. <address id="7actg"></address>
          <address id="7actg"></address>
          1. <object id="7actg"><tt id="7actg"></tt></object>
            AV永久| 日韩午夜成人电影 | 精品国精品自拍自在线 | 亚洲性小说| 台湾三级精品三级在专区 | 免费无码成人无电影在线观看 | 激情欧美国产 | 小黄片链接 | 午夜福利国产在线观看 | 推特裸体gay猛交gay |